WTI's PollCat Solid State PBX Data Recorder
Call Record Buffers & PBX Data Recorders are solid sate data recorders that have the features our customers are looking for including; PBX Data Recording/Polling, Real Time Alarm Notification, Store-and-Forward Features, SMDR Data Storage, Secusre Data Buffering and PBX Traffic Statistics.

PollCat NetLink
Network Ready CDR Buffer with Alarm Monitoring
The PollCat NetLink Call Accounting Terminal is an extremely reliable, PBX data recorder, designed for SMDR/CDR data collection and alarm monitoring. Collected call records can be retrieved via TCP/IP network, via modem, or by a local PC connected directly to the Console Port. The NetLink can also monitor call records for suspicious phone activity or critical alarm conditions. When an alarm is detected, the NetLink can immediately notify the proper personnel by pager, modem, or SNMP trap.

PollCat III
High-Speed, High-Capacity Data Recorder
The PollCat III is a solid state PBX data recorder designed for remote or on-site SMDR/CDR data and alarm collection. The PollCat III can also monitor call records for suspicious phone activity or critical alarm conditions. When an alarm is detected, PollCat III will alert the proper personnel via pager, modem, or console port.

PollCat CRB-256M
256K Pollable Call Record Buffer with Modem
The CRB-256M is a solid-state data recorder designed for remote SMDR/CDR collection from any PBX system that sends ASCII data via an RS232 interface. The CRB-256M provides an economical answer for remote sites that produce a low volume of call records. An internal 2400 bps modem automatically adapts to 2400 or 1200 bps calls to assure reliable connections. The CRB-256M can call your remote polling device or pager when memory is 80% full, or perform an immediate callback on command.

PollCat NetLink Jr. (NLJ-512)
Economical, Network Ready CDR Buffer
The PollCat NetLink Jr. (NLJ-512) provides an economical alternative to our full featured PollCat NetLink. The NetLink Jr. incorporates many of the same convenient features found in our standard NetLink, including network access capability, reliable flash memory, and advanced alarm monitoring. However, the NetLink Jr. includes only 512K of flash memory and a single PBX input port, to fit the requirements of smaller call data recording applications which require less memory for data storage, but still need a cost-effective means for accessing data via TCP/IP network.

PollCat MPC-500
Economical, Low-Volume PBX Data Recording
The Mini PollCat 500 is designed for remote or on-site SMDR/CDR collection and alarm monitoring. The MPC-500 provides an economical solution for remote sites that produce a low volume of call records, but require all of the features and compatibility of the larger PollCat III. The MPC-500 can also monitor records for suspicious call activity or alarm conditions. If suspect call records are detected, the MPC will immediately notify the proper personnel via pager, modem, or console port.

PollCat CRB
Economical, 256K or 512K On-Site Call Record Buffer
No one wants to dedicate a PC for collecting call records! If your PC based call accounting system is connected directly to your PBX, the PollCat CRB can buffer incoming PBX data, thus freeing up the PC. The CRB can record data from any PBX that sends ASCII call records via an RS232 interface.